Introduction of each model

Introduction and standard specifications of vertical lathe and turning center.
For further information and special accessories, please contact us.

turning center

Vertical lathe

TUE(S) series

TUE series

Simple design with ease of use and safety

Multi-function machine type of cutting + milling (S) is adopted as standard 3 types that can be selected according to the size and capability of the machining work.

Stable inner diameter deep hole drilling, where the strengths of the ram system come alive, and the common-bed system, where the column is arranged on a highly rigid bed, provide stable strength.

Standard specifications [TUE-(S)]

size【TUE - 〇〇 (S)】 〇〇…Table dia.  (S)Specification for turning + milling process possible.

Unit 100(S) 150(S) 200(S)
Table dia. mm 1 016 1 450 2 000
Max. swing mm 1 200 2 000 2 400
Max. cutting height mm 850 1 550 1 550
Max. load on table kg 2 000 8 000 15 000
Vertical travel of ram mm 800 900 900
Table speeds min-¹ 2~600 2~400 2~240
Ram spindle speeds min-¹ 15~3 000 15~3 000 15~3 000
TSS

Vertical lathe

TSS-C series

TSS
Utilizing the characteristics of a single column, stable machining of large diameter workpieces

Table movement and table clamp function enables machining of workpieces larger than a table.

The table combines high stability due to the two ultra-precise roller bearings and high rigidity due to the integrated arm with column and back ikel.

Standard specifications [TSS-C,TSS-C(S)series]

size【TSS - 〇〇/△△C】 〇〇…Table dia. △△…Max. swing   (S)Specification for turning + milling process possible.

Unit 20/40C 30/55C
Table dia. mm 2 000 3 000
Max. swing mm 4 000 5 500
Max. cutting height mm 1 800
Max. load on table kg 20 000
Vertical travel of ram mm 1 000
Table speeds min-¹ 2~100 2~80
Ram spindle speeds* min-¹ 15~2 000

*(S) Type

TUD,TMD

Vertical lathe

TUD-C,TUD-C(B) series
TMD-C,TMD-C(B) series

TUD,TMD
Responds to customer needs with high rigidity and safety.
Machining Guide surface
TUD-C
Turning process

Linear guide
TUD-C(B) Sliding surface
TMD-C Turning process
+
Milling process
Linear guide
TMD-C (B) Sliding surface

Standard specifications [TUD-C,TMD-C series]

size【TUD,TMD - 〇〇C】 〇〇…Table dia.

Unit 13 16 20
Table dia. mm 1 250 1 600 2 000
Max. swing mm 1 600 2 000 2 700
Max. cutting height mm 1 100 1 350 1 600
Max. load on table kg 8 000 10 000 15 000
Vertical travel of ram mm 800 800 1 050
Table speeds min-¹ 2~450 2~350 2~450
Ram spindle speeds min-¹ 25~3 000 25~3 000

25~3 000

TUD:Turning processing only TMD: Turning + milling processing

Choice of guide surfaces

TUD,TMD
Solid and tough sliding surface type. *(B) is attached.

Effective in suppressing chattering vibration when
machining difficult-to-cut materials.

Precision responsive linear guide type.

No lost motion, faithful to commands, and capable of a wide
range of machining, even heavy-duty machining.

TDS

Vertical lathe

TDS series

TDS
Realizes high-precision, high-efficiency machining of large, heavy workpieces.

Double column structure enables machining of workpieces with large height and diameter.

Standard specifications [TDS-S series]

size【TDS-〇〇/△△S】 〇〇…Table dia. △△…Max. swing  (S)Specification for turning + milling process possible.

Unit 30/40S 40/50S
Table dia. mm 3 000 4 000
Max. swing mm 4 000 5 000
Max. cutting height mm 2 500 2 750
Max. load on table kg 30 000
Vertical travel of ram mm 1 500
Table speeds min-¹ 1~150
Ram spindle speeds* min-¹ 30~3 000

*(S) type is selected

PAGE TOP