Hydraulic Injection Molding Machine IS series
High performance Hydraulic type IS series of injection molding machines, designed and
built based on our decades as a quality machine builder.
Ultra large-size Hydraulic Injection Molding Machine
“IS3000 / 3500DF”
The direct lock type clamping device has been compactly designed.
High performance, yet easy to operate, these super large-sized machines are built to meet the needs of the new century. Improved design for use in a factory automation (FA) system, this highly efficient machine series is equipped with such features as a compactly built and highly reliable composite type mold clamping unit for great space savings, the injection controller - ultimate in simplified machine operation, faster mold opening and closing speeds, and a mold changing system for high cycle operations.
Features
- Compactly built utilizing a highly reliable direct-lock clamping device.
- Standard features of the highly advanced process controller includes functions as a monitoring device, a panel which allows the confirmation of all molding conditions at a single glance and a large memory capacity of molding conditions.
- Dramatic decrease in dry cycle time due to greater mold opening/closing speed, a time loss prevention system resulting from the locking and unlocking of the halfnuts during mold opening/closing and a special brake circuit.
- Drastic energy-saving is made possible by the use of our original HYDROMATCH SYSTEM which increases the energy of the hydraulic system.
Specification Numbers
| ITEM | UNIT | IS3000DF | IS3500DF | |||
|---|---|---|---|---|---|---|
| Injection Unit Code | i315 | |||||
| Barrel Code | A | B | A | B | ||
| Screw Diameter | mm | 160 | 180 | 160 | 180 | |
| Shot Weight | PS | g | 16260 | 20590 | 16260 | 20590 |
| Injection Pressure | MPa | 173 | 137 | 173 | 137 | |
| Plasticizing Capacity (PS) | kg / h | 820 | 730 | 820 | 730 | |
| Clamping Force | kN / (tf) | 29400 (3000) | 34300 (3500) | |||
| Distance Between Tie Rods (H×V) |
mm | 1900×1800 | 1900×1800 | |||
| Clamp Stroke | mm |
Max. 2700 |
Max. 2700 Nomal 1800 |
|||
| Open Daylight (Max.) | mm | 2800～3700 | 2800～3700 | |||
| Motor for Pump | ｋW | 55+55+55+37 | 55+55+55+37+37 | |||
| Machine Dimensions |
L |
m |
14.5 | 15.0 | 15.4 | 15.9 |
| W | 4.3 | 4.8 | ||||
| H | 3.9 | 4.1 | ||||
Note）
1. Due to continuous improvements, specifications are subject to change without notice.
2. 1MPa=10.2kgf/㎝2, 1kN=102kgf, 1N=0.102Kgf