Die Casting Technical Support
Shibaura Machine will provide Customers throughout the world with its casting solution technologies for every manufacturing scene.
Needs for die cast parts | Part to be machined | Thin/thick walls (complex shape) | Pressure-tight / airtight part | |
---|---|---|---|---|
All die cast parts | Cylinder block & Transmission case | Compressor part | ||
Super-high-speed control | Hugh injection-rate | √ | √ | - |
Pressure buildup control | High density | √ | √ | √ |
Super-low-speed control | Gas content reduction | - | - | - |
Electromagnetic pump melt feed | Short-time melt feed
Melt quality |
- | - | - |
Local squeeze | High density | - | √ | √ |
Vacuum control | Gas content reduction | √ | - | - |
Gas pressure detection | Gas pressure control | √ | - | - |
Heat-insulating shot-sleeve | Melt temperature | - | - | - |
Longevity shot-sleeve | Consistent quality | √ | √ | √ |
CASTVIEW | Quality control | √ | √ | √ |
Needs for die cast parts | Part to be heat treated | Magnesium die casting | Part to be welded | Extra-large-sized die cast part | |
---|---|---|---|---|---|
Automotive suspension part | Thin-walled case for mobile computing | Chassis-connecting part | Inner door panel | ||
Super-high-speed control | Hugh injection-rate | - | √ | - | √ |
Pressure buildup control | High density | - | - | - | - |
Super-low-speed control | Gas content reduction | √ | - | - | - |
Electromagnetic pump melt feed | Short-time melt feed
Melt quality |
√ | √ | √ | - |
Local squeeze | High density | √ | - | - | - |
Vacuum control | Gas content reduction | - | - | √ | √ |
Gas pressure detection | Gas pressure control | - | - | √ | - |
Heat-insulating shot-sleeve | Melt temperature | - | √ | √ | √ |
Longevity shot-sleeve | Consistent quality | √ | √ | √ | √ |
CASTVIEW | Quality control | √ | √ | √ | √ |
Die Casting Technical Support

SUPER-HIGH-SPEED INJECTION CONTROL
The super-high-speed injection on the multistage injection machine shortens the fill time, increases the transmittable casting pressure, makes a sound surface structure and improves the internal quality by fully compressing the porosities.
SUPER-LOW-SPEED INJECTION CONTROL
Our original super-low-speed injection control stabilizes the velocity, which is the most important in laminar-flow die casting, and makes possible die cast parts with no gas entrapment.
PRESSURE BUILDUP CONTROL
Shibaura Machine makes its die casting machines possible to control freely the pressure buildup time by using its unique two-cylinder type injection, allowing that control to suit each quality requirement.

ELECTROMAGNETIC PUMP MELT FEED
The electromagnetic pump melt-feed-system reduces the shot-time-lag from the time of melt feed start until the time of injection start, and yields strength products free of scattered chill layers. In addition, it lowers the content of oxides since the melt does not come in contact with air.

LOCAL SQUEEZE (THE SQUEEZE MASTER)
It controls the state of pressurizing from the end of melt fill to the end of solidification suiting to its degree. The automatic compensation of pressure, flow rate or timing will materialize an ideal shrinkage porosity countermeasure.

VACUUM CONTROL AND GAS PRESSURE DETECTION
It has made it possible to shut off the vacuum valve always before the end of shot to prevent the melt from getting into the vacuum valve. Controlling the vacuum degree inside the die makes the quality consistent.

HEAT-INSULATING SHOT-SLEEVE
In the face of steel material, heat conductivity equivalent to that of a ceramics has been achieved on this special material sleeve. Without a worry of breakage on handling, it prevents the melt temperature drop and reduces the generation of solidified structures. (For Magnesium)
LONGEVITY SHOT-SLEEVE
Compared to conventional SKD material sleeves, the life span is expected to be five to 10 times, making it contribute to consistent qualities.

DIE CASTING MONITOR EQUIPMENT (CASTVIEW)
All kinds of analog data such as injection speed, pressure, temperature, flow rate, gas pressure, etc in conjunction with time are to be easily digitized and monitored. With "the management by seeing", the quantitative management is materialized.
Inquiry About Die-Casting Machines
Die Casting Machine Sales Department
TEL: 81-(0)55-926-5132
FAX: 81-(0)55-925-6592